Jump to content


Photo

softlist Help


  • Please log in to reply
6 replies to this topic

#1 Jerry Gagne

Jerry Gagne

    Advanced Member

  • Members
  • PipPipPip
  • 59 posts
  • LocationAlberta Canada

Posted 15 February 2018 - 07:09 AM

Hi All

Just starting use Softlist and I have dumb question. :)

 

For a simple example when I look at the material list for the rebar on Monolithic footing for a 24x24 pad it tells me I need 204 ft.

There is really only 192' . Obviously it needs to add extra for overlapping but where does it do that?

Trying to figure that out so I can apply that to other products.

Where and the amount it has added to bring the total 204'?

Thanks

 



#2 Jerry Gagne

Jerry Gagne

    Advanced Member

  • Members
  • PipPipPip
  • 59 posts
  • LocationAlberta Canada

Posted 15 February 2018 - 07:20 AM

It looks like softlist is adding about 6% 



#3 Martin Livingston

Martin Livingston

    Advanced Member

  • Members
  • PipPipPip
  • 691 posts
  • LocationHalifax, Nova Scotia

Posted 15 February 2018 - 07:21 AM

Could you post a screen capture of your material definition?


Five out of four people are not very good with fractions

www.cresco.ca


#4 Jerry Gagne

Jerry Gagne

    Advanced Member

  • Members
  • PipPipPip
  • 59 posts
  • LocationAlberta Canada

Posted 15 February 2018 - 07:27 AM

Good morning

I don't use the often.. how to I attach screen shot to this post



#5 Jerry Gagne

Jerry Gagne

    Advanced Member

  • Members
  • PipPipPip
  • 59 posts
  • LocationAlberta Canada

Posted 15 February 2018 - 07:43 AM

Here is the rebar confiquration

Attached Thumbnails

  • rebar.JPG


#6 Verlin Klassen

Verlin Klassen

    Advanced Member

  • Members
  • PipPipPip
  • 262 posts
  • LocationBirnie, Manitoba, Canada

Posted 15 February 2018 - 12:24 PM

If you click on the accounting button in your definition, is there a waste percentage entered?


Verlin Klassen

Westman Drafting


#7 Martin Livingston

Martin Livingston

    Advanced Member

  • Members
  • PipPipPip
  • 691 posts
  • LocationHalifax, Nova Scotia

Posted 16 February 2018 - 10:18 AM

Here is the results from structural slab with footing. The results are dead on twice the parameter for footing rebar

Attached Thumbnails

  • rebar.png

Five out of four people are not very good with fractions

www.cresco.ca





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users