Jump to content


HP T120 Plotter will not select or print in landscape orientation since I upgraded to W10 and SP 2018.


2 replies to this topic

#1 Guest_Mark Tardif_*

Guest_Mark Tardif_*
  • Guests

Posted 08 June 2018 - 05:29 AM

I've tried SP tech support - they blame HP driver.

 

HP was able to plot from a pdf = driver seems ok.

 

Back to SP and they said there was an issue, but not enough people are complaining and they don't seem to want to correct (or can).

 

I'm at a total loss. 



#2 Kevin Rabenaldt

Kevin Rabenaldt

    Advanced Member

  • Members
  • PipPipPip
  • 391 posts
  • LocationSan Antonio

Posted 08 June 2018 - 09:18 AM

Are you saying that if you create a pdf and print that, you are ok.  If so, you may need to create a pdf and print versus printing directly from SP.  Since I take my drawings to a print service when I need to (using pdf) I can review what the print will look like, that is no prints with the incorrect layout or such because I review what actually is going to be printed.



#3 Don Gibbons

Don Gibbons

    Advanced Member

  • Members
  • PipPipPip
  • 375 posts

Posted 08 June 2018 - 12:31 PM

I have a T120, W10, and 2018. Never had a problem. Let's see if I can replicate it on my end:

What are you printing, a plain drawing, plan set, plan set page or a multi drawing?

What size of paper?





Reply to this topic



  


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users