Jump to content


Photo

Attic Space


  • Please log in to reply
No replies to this topic

#1 Brian Berzinskis

Brian Berzinskis

    Advanced Member

  • Members
  • PipPipPip
  • 470 posts
  • LocationNew Jersey

Posted 29 March 2019 - 06:07 PM

I have a couple of questions as I start to play with 2020.

 

So I am assuming that I cannot Auto Generate an attic drawing with a stick frame roof? We pretty much exclusively use stick framing on roof framing in our area.

 

And if I were to cheat the look with Trusses instead is there a way to specify that the wall heights of the attic are at 5 foot high walls instead of specifying the width of the attic space in the truss drawing?

 

And lastly if I generate an attic space at a roof pitch of 12 on 12 and then later change it down to 10 on 12 does it not automatically update my wall spacing?

 

Okay one more. It would be helpful to generate a dashed line at 7 feet high to signify where head room exists and also for half story calculations based on the International Building Code.


  • Keith Almond likes this




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users