2 replies to this topic

[Ken Yoder]

Hi,

I'm needing some help. 

Why are the bottoms 2nd floor walls lower than the tops 1st floor walls?

It seems that somewhere in the process of drawing the floor system, the walls from the 2nd floor dropped about 2 feet.

I have 2x12 joists on 1st and 2nd floor. 10' walls on 1st floor and 9' walls on 2nd floor.

The elevation for my walls are set to the top of the sub-floor and my joists are set to 0. but in the 3-D the walls are around 2' lower than they should be.

Thanks for your help,

Ken Y

[Dennis Asher]

Are you using the circular reference point?

[Brent Hyndman]

Hi Wayne. 

 

You may be best to create a ticket for the project and have tech support take a look.