Jump to content


Photo

Interior Elevation not showing high walls


  • Please log in to reply
3 replies to this topic

#1 Jeremy Plum

Jeremy Plum

    Advanced Member

  • Members
  • PipPipPip
  • 189 posts
  • LocationBishop, Ca.

Posted 31 August 2020 - 01:54 PM

Hello,

probably a simple fix to this but I'm not able to discover it.

 

When i model an interior elevation it does not show the high walls. They are cut off at ceiling height. I have set the clip heights to easily cover the entire wall but still only show from subfloor to ceiling. the walls drawn on different plans (1st, 2nd, etc) but the plans are all in the model. 

 

hopefully this makes sense and someone can point me to the right setting. I've check the system/ project/ drawing/ setting to no avail.

 

thanks!


Jeremy Plum

Plum Design & Construction


#2 Henry Buckner

Henry Buckner

    Advanced Member

  • Members
  • PipPipPip
  • 342 posts

Posted 31 August 2020 - 02:45 PM

When I have to do this I use a building section instead of an interior elevation. There may be another way, but that's the only one I've found.



#3 Rick Kingsbury

Rick Kingsbury

    Advanced Member

  • Members
  • PipPipPip
  • 170 posts
  • LocationSpearfish, SD

Posted 31 August 2020 - 03:36 PM

Right click on the section line for the desired interior elevation and set the new top height.



#4 Jeremy Plum

Jeremy Plum

    Advanced Member

  • Members
  • PipPipPip
  • 189 posts
  • LocationBishop, Ca.

Posted 31 August 2020 - 04:09 PM

Thanks fellas -

 

 

When I have to do this I use a building section instead of an interior elevation. There may be another way, but that's the only one I've found.

i've done this in the past but it is too much clean-up and the interior elevation is great to provide and easy view to the client.

 

 

 

Right click on the section line for the desired interior elevation and set the new top height.

did that but it still is limited to the ceiling and ignores the tall walls that are also in the view.


Jeremy Plum

Plum Design & Construction





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users