6 replies to this topic

[Fred Dickson]

Is there a way to link 2D details to callouts on the floor plan?  I have very detailed sections of structural assemblies and would like the callout on the floor plan to auto track or link with the sheet location when using a planset.  Hope that makes sense.... Thanks!  

[Jon Davis]

If you're using the built in functions for sections and elevations then it should auto populate the information in the bubble when you put it on a page in plan sets. 

[Fred Dickson]

I just want the callout to "auto populate" and not the section or elevation.  I am trying to reference an area on the floor plan and then trying to reference a 2D drawing on the planset that will be on another page.  I don't want the 3D info to even appear where the callout is referencing on the floor plan.  All of this is 2D.  Also, I don't want a section line, just a reference line.  In other words, a callout will appear on the floor plan with a letter -number with a page reference.  On the page that is referenced will be the matching callout with the 2D detail.  Hopefully that makes sense.....

[Jon Davis]

I think you'll have to do that yourself.... I've ran into this issue when doing an enlarged floor plan or a detail from a 2D elevation... Since it's not linked to the model, you just have to

make you're own bubble. It doesn't work like REVIT. 

 

Unless someone else knows how to do it, I haven't figured out a way to use them in 2D

[Fred Dickson]

Add it to the wish list with show stairs below and align wall with wall above/ below.....Or auto draw what i'm thinking...maybe not a good idea.  Thanks!

[Verlin Klassen]

I believe this post shows a way to accomplish what you are wishing to do: http://softplan.com/...detail-markers/

[Fred Dickson]

A good work around for sure.