4 replies to this topic

[Luke Tarallo]

Hello everyone! I'm very new to softplans and am looking for some guidance on the 3D view. I am having a hard time viewing the drawing from the inside of the house. Any tips? 

 

[David Zawadzki]

See if this helps you:

 

https://youtu.be/ktD-20npsAY

[Fred Russell]

Not sure of what you are trying to do, but you should be able to view the interior. sometimes you need to open the camera that is on your tool bar when you are on the 3D page, select edit and click the camera, there, then change the Field of view to maybe 100, and this will give you a wider view of the interior

[Luke Tarallo]

Not sure of what you are trying to do, but you should be able to view the interior. sometimes you need to open the camera that is on your tool bar when you are on the 3D page, select edit and click the camera, there, then change the Field of view to maybe 100, and this will give you a wider view of the interior

Thanks! Those were the options I was looking for.

[Heath Foster]

Also if you have the rooms assigned you can go to the camera tab and click on go to room. That will put you in the center of the room in 3d. A 3d mouse will help in navigating around in 3d. Like this one. https://3dconnexion.com/us/spacemouse/