Jump to content


Replying to Viewing Framing Only


Post Options

    • Can't make it out? Click here to generate a new image

  or Cancel


Topic Summary

Keith Almond

Posted 15 February 2020 - 02:08 PM

Reload the default material file.


Posted 15 February 2020 - 11:43 AM

How can I go back from extracting frame to having all the materials turned on, without going to he "Material" and selecting one by one the options that were turned off?


Posted 10 November 2016 - 10:29 AM

Hello there, I tried what Martin said and it worked out and now I don't know how to reset it. Can you tell me step by step on that?

Thank you


Matt Orner

Posted 08 January 2016 - 03:29 PM

Perfect. thanks. Missed that.

Keith Almond

Posted 07 January 2016 - 11:26 AM

Matt, as Martin said above, you have to CHECK the FRAMING section of EXTRACTION OPTIONS

 

2016.01.07_12h25m38s_001.png


Matt Orner

Posted 07 January 2016 - 10:57 AM

when i do this there is nothing. I can see inside at everything but no framing materials show.

Richard Child

Posted 01 March 2015 - 10:21 AM

One word of advice, if you have set textures, colors, and material definations be sure to save them to a new material file prior to do this or you will lose all that work. I learned the hard way.


Posted 25 February 2015 - 04:52 PM

Thanks. That's what I needed.

Keith Owens

Posted 25 February 2015 - 06:25 AM

WBR, I believe you mentioned you were on version 14. I haven't used version 14 in a while, but when you go to build a 3d model and the dialog box opens, make sure you check the box for the framing area. Then you can edit any of the surfaces to shut off their visibility. There are different ways you can get the same result - I did the rendering below in version 14 to show you an example.

 

3d Framing.jpg


Martin Livingston

Posted 24 February 2015 - 06:37 PM

Open your 3D drawing and open the "options" tab. Click on "load Material File (black arrow) and select stick frame. That will remove most of the components. Click on Extraction options (red arrow) and turn off everything else you don't want to see and turn on the framing components you do want to see. When you are done you just reset your extraction options and load the default 3D material file to revert back.


Review the complete topic (launches new window)