Monday's challenge question:
Anyone remember or know the trig formula to figure out the bottom sill angle for this window???
Roof is 12/12 pitch and the wall angle is 45 deg.
Posted 20 February 2024 - 09:10 AM
Steve, you lose points for not showing your working out, but I concur 35.27°
√(12² +12²) =16.97
Tan x =12/16.97 = 0.7071
Arctan x = 35.27°
Posted 20 February 2024 - 10:54 AM
Steve, you lose points for not showing your working out, but I concur 35.27°
√(12² +12²) =16.97
Tan x =12/16.97 = 0.7071
Arctan x = 35.27°
Exactly Keith, the 12/12 on a horizontal plane yields a diagonal of 16.97 using Pythagorean's theorem. the 16.97" is now the run on the hip 12/12, 16.97" run with rise of 12" yields the new triangle diagonal of 20.8125" resulting in an 8.5/12 pitch/ 35.27 degree angle. I pulled the angle from memory after 50+ years of almost all hand framed roofs, minimal trussed roofs. Did not get real deep into the Tangent Formula with opposite /adjacent yielding the tangent and then converting the tangent-arc tangent- degrees. All good fun!! Enjoy a Fantastic Day!!
Posted 20 February 2024 - 11:09 AM
I smell a competition brewing.
You guys can meet for coffee and get crackin....
https://en.wikipedia..._in_mathematics
Posted 20 February 2024 - 11:17 AM
I smell a competition brewing.
You guys can meet for coffee and get crackin....
I may have to just break out the speed square and reference the hip/valley line, save the pencil lead and calculator batteries!
Posted 20 February 2024 - 11:46 AM
I really wasn't expecting to get any responses to my question. WOW was I wrong as usual.
Thanks to Steve, Carla,Keith and Allen for your input.
Let's all take this as a lesson never make a wager with your challenges on SPLASH! TOO MANY SMART PEOPLE!!!
Thanks Again to All
Russ
Posted 20 February 2024 - 12:13 PM
I may have to just break out the speed square and reference the hip/valley line, save the pencil lead and calculator batteries!
I've no idea how to use a speed square ... I've piloted a desk all my life. Had to rely on my math memory, which to be fair, isn't good.
Posted 21 February 2024 - 11:03 AM
My grandfather taught me how to do this with a framing square a long time ago. Use the roof pitch on one side and 17" on the other side. Back before calculators existed.
What do you mean by, "before calculators existed"? I remember doing college chemistry and Trigonometry with this calculator:
https://en.wikipedia...wiki/Slide_rule
And the batteries never needed charging...
Award winning Design+Builder with over 40 years of construction experience. Homes built in Michigan, Utah and Idaho. Construction projects in CA, AZ, NV, ID, UT, NE, MO, NM, FL, GA, NY, and MI.
https://idahocustomhomes.weebly.com/
Twinmotion 2024, Autocad, SoftPlan 2024, Solidbuilder, Chief Architect X15, Sketchup, 3D Home Architect, etc.
CyberPowerPC Syber Forti SFG9EX Gaming Desktop Computer, Intel Core i9-9900K 3.6GHz, 32GB RAM, 3TB HDD + 1TB SSD, NVIDIA GeForce RTX 3070 10GB, Windows 11 Pro
.Disclaimer: I'm not saying I'm Superman. All I am saying is no one has seen Superman and me in the same room together.<p><p>
Softplan user since 1989
Posted 21 February 2024 - 12:03 PM
My grandfather taught me how to do this with a framing square a long time ago. Use the roof pitch on one side and 17" on the other side. Back before calculators existed.
Yes, I used and still use my Grandfathers framing square in my mid 70's with all the tables, and have used the pitch/17 for years. Updated my reference to the speed square to try and keep up with the times
for those that are not familiar with all the brace, jack, common and hip etc tables on the framing square, one handy tool.
Posted 21 February 2024 - 02:25 PM
What do you mean by, "before calculators existed"? I remember doing college chemistry and Trigonometry with this calculator:
https://en.wikipedia...wiki/Slide_rule
And the batteries never needed charging...
The first handheld calculator was the Cal-Tech which came out in 1967. In 1967 I was 8 years old and working for my grandfather in his woodshop building cabinets. I also helped him build an addition to his house and he taught me to use a framing square to figure out the rafter cuts. So, when in 1967 the Cal-Tech came out would determine whether my statement was totally accurate.
0 members, 1 guests, 0 anonymous users