Jump to content


Photo

Interior Doors Not showing door width or Jambs

Door

  • Please log in to reply
3 replies to this topic

#1 Mark Gradison

Mark Gradison

    Member

  • Members
  • PipPip
  • 18 posts

Posted 15 December 2015 - 03:20 PM

My interior doors are displaying without the door thickness or the jamb.  My exterior doors on an exterior wall work fine; but an exterior door placed on an interior wall; the door thickness and jamb do not show.

So it is something in my walls settings??   Or my door settings?  

Please help.



#2 Keith Almond

Keith Almond

    Advanced Member

  • Members
  • PipPipPip
  • 5,092 posts
  • LocationBrockville, Ontario, Canada

Posted 15 December 2015 - 03:53 PM

Probably the opening settings ... Should look something like this, or whatever you want to adjust them too

 

2015.12.15_16h51m58s_001.png

 

Setting the frame width to 0" will change the frames (ALL OF THEM) to be the same width as the wall ...


Keith

There are 10 types of people in this world ....... Those who understand binary, and those who don't.

Softplan user since version 5.5.2.5

www.homehardwarekingston.ca

#3 Mark Gradison

Mark Gradison

    Member

  • Members
  • PipPip
  • 18 posts

Posted 16 December 2015 - 08:04 AM

Yes, I have similar settings in place.  I have never had this happen.  Not sure what else it could be. 



#4 Mark Gradison

Mark Gradison

    Member

  • Members
  • PipPip
  • 18 posts

Posted 16 December 2015 - 08:07 AM

This is a brand new drawing.  I do a lot of save as drawings.  So I never thought to look, but the "Outside Visible" was not checked in the wall setting.

Problem solved.  Bazaar!







Also tagged with one or more of these keywords: Door

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users