I'm new to Softplan and am having trouble trying to setup my Dimensioning. What I'm trying to do is dimension to outside of 1/2 OSB on exterior walls. So when dimensioning a wall the thickness would show up drawn as 6" instead of 5 1/2". Drawing exteriors 6" is common practice in my neck of the woods.
Dimensioning to outside of OSB
#2
Posted 05 February 2015 - 11:00 PM
Change the OSB or in this definition "Sheathing" to dimension and extension--outside
For this I changed the Sheathing to bearing, but it doesn't have to be bearing for the dimensioning to be like you want.
If you want to have the 6" measurement show on the inside of the stud, you can change the stud at dimension and extension to inside
#3
Posted 06 February 2015 - 09:09 AM
Note:
If you change the sheathing dimension/extension to outside you will also have to change the stud dimension/extension to inside or you won't see a wall thickness ---------- Must start reading all of the above posts before replying .....
There are 10 types of people in this world ....... Those who understand binary, and those who don't.
Softplan user since version 5.5.2.5
www.homehardwarekingston.ca
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users