5 replies to this topic

[Jaime Solis]

 roof not fitting rigt.JPG   72.07KB   1 downloads  roof not fitting rigt.JPG   72.07KB   1 downloads

 

I can't get the roof to fit right, my soffit and fascia is missing and gutters.

[Steve and Carla Farnam]

Jaime try adjusting the lollipops to another location along the same wall

and do a cleanup. When editing the roof edges be sure the soffit and fascia

are enabled and the show gutter box is checked. You may also want to turn

off the insulation 3d visibility.

[Jaime Solis]

Jaime try adjusting the lollipops to another location along the same wall

and do a cleanup. When editing the roof edges be sure the soffit and fascia

are enabled and the show gutter box is checked. You may also want to turn

off the insulation 3d visibility.

how do i turn off the 3D visibility on insulation

[Steve and Carla Farnam]

Jaime edit the ceiling >common tab>uncheck Extract in Model.

You will have to recheck the box for the ceiling to show for interior views

[Jaime Solis]

for some reason on 3D mode i can not see my structure i tried unchecking and checking auto horizon but no luck would you happen to know of a way to fix that. By the way thanks for the help on the roof part and insulation 

[Steve and Carla Farnam]

Jaime, go to your camera tool and see where the house is,

sometimes the zoom out distance is so far out you see nothing.

All assuming the drawing is in the model.