What I was talking about Harlon, was exactly what Richard did, but instead of making the profile with both materials, using a single material for each. Or use the stucco-fiber where you would normally do sheathing, and then add the boards as a single profile so that you could colour them separately.
I was having trouble with spacing, so I did two profiles one with the Board on the end and one with it in the centre, but the key is to make a profile with a single line to measure it's extent.
2020.04.05_15h01m41s_002_.png 5.47KB
1 downloads
2020.04.05_15h01m57s_003_.png 6.06KB
1 downloads
That way they can be coloured separately as I was describing in the earlier post.
2020.04.05_15h00m05s_001_.png 970.95KB
0 downloads
2020.04.05_15h15m26s_004_.png 490.19KB
0 downloads
2020.04.05_15h22m11s_005_.png 219.26KB
0 downloads
2020.04.05_15h25m19s_007_Wall.png 49.06KB
1 downloads