12 replies to this topic

[STEPHEN AMSTEIN]

Newbie question : I just did the update for 2022 - a lot of my settings changed, so I'm spending time going back to reset a lot of things. In 2020 I had the int. trim showing on my plans, but I cannot figure/remember on to show this in 2022. thanks in advance for the help.  

[Gary Wicklund]

Not quite sure what your looking for? Maybe look in visible items for openings?

[STEPHEN AMSTEIN]

I have looked there several times, I even compared 2020 vs. 2022 and I cant seem to find the difference. I  tried doing a screen shot and inserting into this to show what I'm talking about, but i cant figure out how to insert the pics 

[Richard Rubinski]

Click on reply, then on the bottom right click on "MoreReply Options", then bottom left click on "Choose File", after chosing file make sure you click on "Attach This File".

 

 

Attached Files

•  attach.JPG   15.68KB   2 downloads
•  more reply options.JPG   14.87KB   3 downloads

[Richard Rubinski]

You should be able to show the trim on the drawing, but it won't show on the Plan Set Page, since theyr'e not printable items. under "Drawing Mode Visibilities" check "Show Non-Printable Items" to show on your Drawing. Also when you edit the Opening make sure you have "Default Trim" or "Custom Trim" checked.

 

 

Attached Files

•  non printable items.JPG   123.97KB   2 downloads

[Richard Rubinski]

Here's a link from the past.

 

https://softplan.com...=+opening +trim

[STEPHEN AMSTEIN]

 2020 door.jpg   17.98KB   0 downloads  2022 door.jpg   23.76KB   0 downloadsI HAVE LOOKED AT MODE VISIBLITIES AND IT IS MARKED, SO IM NOT SURE WHY IT IS NOT SHOWING  FIRST PIC IS 2020 2ND IS 2022

[Richard Rubinski]

When you edit the opening do you have Default or Custom Trim checked?

[STEPHEN AMSTEIN]

RICHARD, I HAVE TRIED BOTH WAYS AND SEEMS TO HAVE NO EFFECT.

[STEPHEN AMSTEIN]

I FIGURED IT OUT - I NEEDED TO HAVE - WALL INTERIOR TREATMENT TURNED ON - UNDER MODE VISIBILITIES - WHO KNEW 

THANKS FOR THE HELP

[Richard Rubinski]

That’s good to know. I’m glad you figured it out.

[Richard Rubinski]

It must be checked by default. I think we're not the only ones that didn't know that existed. Do you know how it got turned off?

[Jon Davis]

Do you know how it got turned off?

 

Gremlins. I'm convinced of it.