6 replies to this topic

[Rick Kingsbury]

Anyone have exterior walls that disappear for no apparent reason?

I can't understand what would cause this.

[Kathy Penner]

Yes, I've had the same thing happen.  I thought it was just 'something I must have done'.

[Sam Morgan]

happens occasionally here...cleanup usually fixes it

[Rick Kingsbury]

OK. Thanks guys! I will give the cleanup a try!

[Allen McDonnell]

Yes....delete any opening that is in the wall then hit undo....that works for me.

[Rick Kingsbury]

After fooling around with it I found that reducing the wall joins fixed it.

[Dennis Asher]

I had this happen on a job recently.  I sent a ticket to support and they fixed my problem within a day.  I don't like the way beams fillet and show on the 3d elevations.  I have tried in the past to make a beam that is wrapped with stucco and I just can't get them to fillet properly.  My work around is to use a stucco wall set to the height of what the beam would be and then offset to the appropriate height and uncheck cleanup.  I then put that wall on a hidden layer and turn off visibility.  That "beam wall" was making the house wall disappear.  Tech support had be reduce the join tolerances on the "beam wall" and that fixed my problem.