49 replies to this topic

[Keith Almond]

Lattice - 2 of 3

Attached Files

•  Lattice - Minwax Woodstain Colours 2.zip   1.34MB   158 downloads

[Keith Almond]

Lattice 3 of 3

Attached Files

•  Lattice - Minwax Woodstain Colours 3.zip   883.57KB   186 downloads

[Keith Almond]

I've just been looking at Minwax's colours .... Their palette was more extensive than I showed, but its difficult to sample the colours from woodstain samples, so I must have cut my palette short when I made it originally. You'll just have to make do with what you've got.

[Keith Almond]

The trim colours I uploaded earlier were plain colours.

 

Use these if you want to show stained wood. I understand that the Mitten colours really aren't available for wood, but there are coloured stains that are available from various manufacturers, and these stains will allow you to co-ordinate your colours.

 

You can of course use these for staining interior trims, fixtures, cabinets etc. Pretty much anything wooden.

 

Again, as stated above, Minwax colour stains are limited.

 

Wood Trim - 1 of 3

Attached Files

•  Wood Trim - Mitten Colours.zip   1.34MB   215 downloads

[Keith Almond]

Wood trim - 2 of 3 and 3 of 3

Attached Files

•  Wood Trim - Minwax Woodstain Colours.zip   434.24KB   179 downloads
•  Wood Trim - Mitten Colours 2.zip   636.78KB   178 downloads

[Brad Graber]

Thanks Keith, I will give these a go on my next rendering and post the results,.

[Matt Orner]

Keith this is awesome. All I use is Mitten Siding on my homes. This will help a ton. Thanks again. 

[Keith Almond]

Glad to be of assistance.

[Trevor Bauer]

Keith,

Thanks for sharing the siding and esp the board and batten. We also use Mitten and it will make my renderings just that much easier. Thanks.

[Joseph Smith]

Okay Softplan Users, since you've all been so nice to me on the forum, to celebrate my 1000th post, I'm going to give you a small gift ....

 

In a recent thread there was some discussion about Board & Batten Siding, and as a few of you may know, I did a little experimenting with some graphic design, and as a result here is a ZIP file containing my work.

 

This ZIP file contains 67 different colours of board and batten siding @ 8" o.c., all of which are completely seamless. 54 are based on MITTEN VINYL colours and 13 are based on MINWAX woodstain colours. These should enable you to coordinate with standard vinyl or stained finishes - These tiles have been created from a FILTER FORGE texture, and some graphic wizardry. Use them as you see fit, there are no copyright restrictions ... Just don't sell them.

 

Standard Disclaimer ... These are as close as I can get them, but please check actual samples, I take no responsibility for issues arising from their use. ....

 

If you use them, a thank you would be appreciated, and it would be great if you could post a 3D model view showing how they turn out.

 

I hope you find them useful.

 

DEAR SOFTPLAN ... If you wish to use these textures inside the program, feel free - if you think there may be issues with the naming, please rename them to suit.

 

Sample ... Annapolis Blue

 

Annapolis Blue.jpg

 

I have Filter Forge 6, just need to learn to use it.

 

Thanks for Board & Batton Keith!

[Tom Rogers]

Keith-just ran across this post (again) from 2015 and thanks for the board and batten patterns.  Thank you very much.  I have been trying to find some that I like to no avail.  Of course I find it about 2 hours after I sent the client his design rendering. 

[Steve and Carla Farnam]

Thanks Keith! We will put these to good use!

[Steve Haarmann]

Hmm - I just tried to download the board and batten textures but an error message says no longer available!

 

Keith, is there any chance you could re-upload these?

 

Thanks 

[Keith Almond]

Re-uploaded as requested.

Attached Files

•  Softplan Textures - Board & Batten.zip   1.91MB   455 downloads

[Martin Wrobel]

Keith

 

Thanks for the Board and Batten Textures. Any way you could repost the vic west steel textures again. Thanks

[Steve Haarmann]

Thank you Keith - this is very much appreciated !

[Keith Almond]

Here you go Martin.

Attached Files

•  Supervic.zip   64.66KB   346 downloads

[Todd Williard]

We recently were hit with ransomware. Lost EVERYTHING, details, notes, symbols, textures, job files etc.   . Trying to get all my textures back. I remembered all the great textures that Keith shared. When i click on the attachments to download it says the files are not there? Am I doing something wrong or were they removed?

[Keith Almond]

Todd, it appears that the files are automatically removed after a certain period of time.

 

PM me with your email address, and I'll send you whatever I can.

[Todd Williard]

Thanks Keith,

I sent you a PM.